Lift-Out Flood Barrier
LO-510
A rugged water stopper, the Lift-Out Flood Barrier provides flood protection at the time of need. It is installed in flooding conditions and stored away from the opening when flood risk is low.
Available in mild steel, stainless steel or aluminum construction and customized to meet your opening requirements. Designed and tested to meet FM standards.
To download specifications and product information, see the black tabs located in the upper right corner (desktop) or bottom (mobile) of your screen. To receive an Operation & Maintenance Manual, please contact PS Flood Barriers at (877) 446-1519.
⚠️ WARNING:
This product can expose you to chemicals including nickel, lead, and hexavalent chromium, which are known to the State of California to cause cancer, and lead and toluene diisocyanate (TDI), which are known to cause birth defects or other reproductive harm. These substances may be present in or released from materials such as galvanized coatings, stainless steel, aluminum alloys, and polyurethane paints or coatings. For more information, go to www.P65Warnings.ca.gov.
*This flood product has been tested to the ANSI/FM 2510-2013 flood protection standard and has passed the required performance criteria for the Hydrostatic Load Test (section 4.3.3). All testing is conducted with an independent third-party observer to provide validation in the testing procedures and results.
LIFT-OUT FLOOD BARRIER BENEFITS
- Quick and easy deployment during flood risk
- Flush sill design, no trip hazard at opening
- Compression sealed with simple latch system
⚠️ WARNING:
This product can expose you to chemicals including nickel, lead, and hexavalent chromium, which are known to the State of California to cause cancer, and lead and toluene diisocyanate (TDI), which are known to cause birth defects or other reproductive harm. These substances may be present in or released from materials such as galvanized coatings, stainless steel, aluminum alloys, and polyurethane paints or coatings. For more information, go to www.P65Warnings.ca.gov.
*This flood product has been tested to the 2013 ANSI/FM 2510 flood protection standard and has passed the required performance criteria for the Hydrostatic Load Test (section 4.3.3). All testing is conducted with an independent third-party observer to provide validation in the testing procedures and results.